MC Double-crank monobloc press
1 000 – 2 500 kN
Two connecting rods, six long guides, wider bolsters for progressive-die work.
MC When the bolster width or off-centre loading exceeds what a single-crank machine can handle comfortably, the MC range steps in. Two connecting rods spread the load symmetrically across a long bolster; six long slide guides maintain parallelism under heavy progressive-die conditions. The monobloc frame keeps the footprint compact — and because it has no press columns, it has a clear advantage whenever a crossbar transfer or similar solution is required, unlike a closed H-frame such as the DS.
Key features
- Two connecting rods for balanced loading across wide bolsters.
- Six long slide guides — maximum parallelism under off-centre load.
- No press columns — ideal when a crossbar transfer is required, unlike a closed H-frame.
- Bolsters up to 2 420 × 910 mm for long progressive tools.
- DMS as standard — automatic stroke and slide-adjustment from recipes.
- Optional light curtains, opening door, two-hand control, levelling elements.
Specifications
Model designations and units as published in the 2026 catalogue. Verify the exact figure with our engineering team before quoting.
| Parameter | MC1000-E2S | MC1600-E2S | MC2500-E2S |
|---|---|---|---|
| Nominal capacitykN | 1 000 | 1 600 | 2 500 |
| Nominal heightmm | 6.3 | 6.3 | 6.3 |
| Flywheel energy, continuouskJ | 6.30 | 10.08 | 15.75 |
| Flywheel energy, single strokekJ | 12.60 | 20.16 | 31.50 |
| Nominal speedspm | 58 | 47 | 35 |
| Variable speedspm | 29–75 | 23–61 | 26–45 |
| Stroke adjustmentmm | 160 | 200 | 250 |
| Bed dimensions (W × D)mm | 1 660 × 630 | 2 000 × 760 | 2 420 × 910 |
| Slide dimensions (W × D)mm | 1 410 × 550 | 1 700 × 660 | 2 030 × 850 |
| Shut heightmm | 350 | 410 | 470 |
| Gap between columnsmm | 650 | 780 | 720 |
| Height of work surfacemm | 920 | 980 | 1 060 |
| Slide adjustmentmm | 80 | 95 | 110 |
| Driving motorkW | 18.5 | 20 | 25 |
All MC presses ship with the device-management system (DMS), Goizper clutch-brake and Herion safety valve as standard. Specifications subject to change without prior notice.
Tell us the part — we'll specify the press.
Tell us the part, the tonnage and the cadence — we'll specify the MC (or the right press) and the line around it.