Hydraulic
PH-M Monolithic hydraulic press
1 600 – 10 000 kN
Programmable tonnage and cushion — 1 600 to 10 000 kN.
PH-M Loading 3D model…
The PH-M monolithic hydraulic range is an efficient alternative for a broad spectrum of forming applications — automotive, white goods, deep drawing, calibration and more. Hydraulic-cushion capacities are matched to the press tonnage, with table sizes and capacities up to 10 000 kN on request.
Key features
- Monolithic stress-relieved frame — long-term dimensional stability.
- Programmable tonnage — stored per recipe.
- Programmable hydraulic cushion — ratio sized to press tonnage.
- TDC / BDC and speed-change point fully programmable.
- EN ISO 16092-1 & -3 safety — flexible choice of hydraulic component brands.
- Intrinsically-safe main hydraulic block · proportional die-cushion control · up to 100 stored recipes · EN ISO 13849-1 PL e.
Specifications
Model designations and units as published in the 2026 catalogue. Verify the exact figure with our engineering team before quoting.
| Parameter | PH160-M | PH250-M | PH315-M | PH400-M | PH500-M | PH600-M | PH800-M | PH1000-M |
|---|---|---|---|---|---|---|---|---|
| Nominal capacity (kN) | 1 600 | 2 500 | 3 500 | 2 500 | 5 000 | 6 000 | 8 000 | 10 000 |
| Cushion capacity (kN) | 630 | 1 000 | 1 250 | 1 600 | 2 000 | 2 500 | 3 150 | 4 000 |
| Bed dimensions (mm) | 1300×1000 | 1600×1300 | 1600×1300 | 1600×1300 | 1600×1300 | 1600×1300 | 2200×1600 | 2200×1600 |
| Daylight (mm) | 700 | 700 | 700 | 700 | 700–1250 | 700–1250 | 1000–1600 | 1000–1600 |
| Slide stroke (mm) | 630 | 800 | 800 | 800 | 800–1000 | 800–1000 | 1000–1250 | 1000–1250 |
| Cushion stroke (mm) | 250 | 320 | 320 | 320 | 320–420 | 320–420 | 400–500 | 400–500 |
On request — alternative bolster dimensions and capacities up to 10 000 kN. Specifications subject to change without prior notice.
Tell us the part — we'll specify the press.
Tell us the part, the tonnage and the cadence — we'll specify the PH-M (or the right press) and the line around it.