PH-C Open-front hydraulic press
630 – 2 500 kN
High-speed open-architecture hydraulic — 630 to 2 500 kN.
PH-C PH-C is the open-front hydraulic complement to the closed-frame PH-M. The C-frame geometry gives full three-side access to the work area, ideal both for manual feeding and for integration with automatic feeders. High motion speeds, programmable tonnage and a programmable hydraulic cushion combine with single- and double-stroke modes and light curtains to deliver a press that balances productivity with the flexibility hydraulics offer.
Key features
- High slide speeds for short cycle times.
- Programmable tonnage and cushion per stored recipe.
- Programmable TDC / BDC and speed-change point (SCP).
- Single- and double-stroke modes with light curtains.
- Extended tool life · sound-proof panels · automatic die setup.
- Ergonomic for manual or automatic feeding · fast die changeovers.
Specifications
Model designations and units as published in the 2026 catalogue. Verify the exact figure with our engineering team before quoting.
| Parameter | PH63-C | PH100-C | PH160-C | PH250-C |
|---|---|---|---|---|
| Nominal capacitykN | 630 | 1 000 | 1 600 | 2 500 |
| Bed dimensions (W × D)mm | 710 × 630 | 850 × 710 | 850 × 710 | 850 × 710 |
| Daylightmm | 800 | 800 | 800 | 800 |
| Cushion capacitykN | 250 | 400 | 630 | 1 000 |
| Cushion strokemm | 200 | 200 | 200 | 200 |
| Cushion dimensionsmm | 480 × 480 | 600 × 600 | 600 × 570 | 600 × 570 |
Specifications subject to change without prior notice.
Tell us the part — we'll specify the press.
Tell us the part, the tonnage and the cadence — we'll specify the PH-C (or the right press) and the line around it.